Alireza Bahrami

Refereegranskat

• Barve, P., Bahrami, A. & Shah, S. (2024). A Comprehensive Review on Effects of Material Composition, Mix Design, and Mixing Regimes on Rheology of 3D-Printed Geopolymer Concrete. Bentham, Open Construction & Building Technology Journal, 18 (), 10.2174/0118748368292859240313061706 [Mer information]

• Johansson, L., Bahrami, A., Wallhagen, M. & Cehlin, M. (2024). A comprehensive review on properties of tailings-based low-carbon concrete: Mechanical, environmental, and toxicological performances. Elsevier, Developments in the Built Environment, 18 (), 10.1016/j.dibe.2024.100428 [Mer information]

• Ghanizadeh, A., Amlashi, A., Bahrami, A., Isleem, H. & Dessouky, S. (2024). A formulation for asphalt concrete air void during service life by adopting a hybrid evolutionary polynomial regression and multi‑gene genetic programming. Springer, Scientific Reports, 14 (), 10.1038/s41598-024-61313-x [Mer information]

• Honghao, R., Bahrami, A., Cehlin, M. & Wallhagen, M. (2024). A state-of-the-art review on connection systems, rolling shear performance, and sustainability assessment of cross-laminated timber. Elsevier, Engineering structures, 317 (), 10.1016/j.engstruct.2024.118552 [Mer information]

• Hammad, M., Bahrami, A., Khokhar, S. & Khushnood, R. (2024). A State‐of‐the‐Art Review on Structural Strengthening Techniques with FRPs: Effectiveness, Shortcomings, and Future Research Directions. MDPI, Materials, 17 (6), 10.3390/ma17061408 [Mer information]

• Moradi Moghaddam, H., Keramati, M., Bahrami, A., Ghanizadeh, A., Amlashi, A., Isleem, H., Navazani, M. & Dessouky, S. (2024). Application of hybridized ensemble learning and equilibrium optimization in estimating damping ratios of municipal solid waste. Springer, Scientific Reports, 14 (1), 10.1038/s41598-024-67381-3 [Mer information]

• Mydin, M., Hamah Sor, N., Bahrami, A., Dulaimi, A., Palanisamy, J., Omar, R. & Abdullah, M. (2024). Application of treated sugarcane bagasse fiber in lightweight foamed concrete composites and its influence on strength properties and thermal conductivity. Sage, Journal of Engineered Fibers and Fabrics, 19 (), 10.1177/15589250241273943 [Mer information]

• Sharma, U., Gupta, N., Bahrami, A., Onuralp Özkılıç, Y., Verma, M., Berwal, P., Althaqafi, E., Amir Khan, M. & Islam, S. (2024). Behavior of Fibers in Geopolymer Concrete: A Comprehensive Review. MDPI, Buildings, 14 (1), 10.3390/buildings14010136 [Mer information]

• Madenci, E., Özkılıç, Y., Bahrami, A., Hakeem, I., Aksoylu, C., Asyraf, M., Beskopylny, A., Stel’makh, S., Shcherban’, E. & Fayed, S. (2024). Behavior of functionally graded carbon nanotube reinforced composite sandwich beams with pultruded GFRP core under bending effect. Frontiers, Frontiers in Materials, 10 (), 10.3389/fmats.2023.1236266 [Mer information]

• Iqbal, M., Sahar, U., Bahrami, A., Yaseen, N. & Siddique, I. (2024). Development of Sugarcane Bagasse Ash Blended Cementitious Composites Reinforced with Carbon Nanotubes and Polypropylene Fibers. MDPI, Journal of Composites Science, 8 (), 10.3390/jcs8030094 [Mer information]

• Majeed, S., Mydin, M., Bahrami, A., Dulaimi, A., Özkılıç, Y., Omar, R. & Jagadesh, P. (2024). Development of ultra-lightweight foamed concrete modified with silicon dioxide (SiO2) nanoparticles: Appraisal of transport, mechanical, thermal, and microstructural properties. Elsevier, Journal of Materials Research and Technology, 30 (), (3308-3327). 10.1016/j.jmrt.2024.01.282 [Mer information]

• Shakouri Mahmoudabadi, N., Bahrami, A., Saghir, S., Ahmad, A., Iqbal, M., Elchalakani, M. & Özkılıç, Y. (2024). Effects of eccentric loading on performance of concrete columns reinforced with glass fiber‑reinforced polymer bars. Springer, Scientific Reports, 14 (), 10.1038/s41598-023-47609-4 [Mer information]

• Mydin, M., Jagadesh, P., Bahrami, A., Dulaimi, A., Özkılıç, Y. & Omar, R. (2024). Enhanced fresh and hardened properties of foamed concrete modified with nano-silica. Elsevier, Heliyon, 10 (4), 10.1016/j.heliyon.2024.e25858 [Mer information]

• Shewale, M., Bahrami, A., Murthi, P. & Chidambaram, R. (2024). Enhancing Load-Carrying Capacity of Reinforced Concrete Columns with High Aspect Ratio Using Textile-Reinforced Mortar Systems. MDPI, Buildings, 14 (7), 10.3390/buildings14072050 [Mer information]

• Sathvik, S., Kumar, G., Bahrami, A., Nitin, G., Singh, S., Althaqafi, E. & Özkılıç, Y. (2024). Evaluation of asphalt binder and mixture properties utilizing fish scale powder as a biomodifier. Elsevier, Journal of Materials Research and Technology, 20 (), 10.1016/j.cscm.2024.e03238 [Mer information]

• Huang, B., Bahrami, A., Javed, M., Azim, I. & Iqbal, M. (2024). Evolutionary Algorithms for Strength Prediction of Geopolymer Concrete. MDPI, Buildings, 14 (5), 10.3390/buildings14051347 [Mer information]

• Madenci, E., Özkılıç, Y., Bahrami, A., Aksoylu, C., Asyraf, M., Hakeem, I., Beskopylny, A., Stel’makh, S., Shcherban’, E. & Fayed, S. (2024). Experimental investigation and analytical verification of buckling of functionally graded carbon nanotube-reinforced sandwich beams. Elsevier, Heliyon, 10 (8), 10.1016/j.heliyon.2024.e28388 [Mer information]

• Wagh, M., Waghe, U., Bahrami, A., Ansari, K., Özkılıç, Y. & Nikhade, A. (2024). Experimental investigation of mechanical and durability performances of self-compacting concrete blended with bagasse ash, metakaolin, and glass fiber. Frontiers, Frontiers in Materials, 11 (), 10.3389/fmats.2024.1351554 [Mer information]

• Murugan, P., Bahrami, A., Murugan, V. & Kumaran, A. (2024). Experimental Study on Hollow Steel Sections Under Elevated Temperature. CEJ Publishing Group, Civil Engineering Journal, 10 (3), (859-884). 10.28991/cej-2024-010-03-014 [Mer information]

• Romero, L., Bahrami, A., Awoyera, P., Fadire, O., Valarde, A., Mydin, M. & Arunachalam, K. (2024). Exploring effects of supplementary cementitious materials on setting time, strength, and microscale properties of mortar. Springer, Discover Applied Sciences, 6 (), 10.1007/s42452-024-06180-x [Mer information]

• Ren, H., Bahrami, A., Cehlin, M. & Wallhagen, M. (2024). Flexural Behavior of Cross-Laminated Timber Panels with Environmentally Friendly Timber Edge Connections. MDPI, Buildings, 14 (5), 10.3390/buildings14051455 [Mer information]

• Badawi, M., Bahrami, A., Ghalla, M., Emara, M., Mlybari, E. & Elsamak, G. (2024). Flexural strengthening of reinforced concrete cantilever beams having insufficient splice length. Elsevier, Results in Engineering (RINENG), 24 (), 10.1016/j.rineng.2024.102869 [Mer information]

• Amin, F., Bahrami, A., Waqas, H., Naveed, M., Ejaz, A., Hanif, M. & Ejaz, A. (2024). Influence of arch action on load-carrying capacity of double-sized industrial precast slabs: A combined numerical and experimental study. Elsevier, Results in Materials, 23 (), 10.1016/j.rinma.2024.100575 [Mer information]

• Özkılıç, Y., Althaqafi, E., Bahrami, A., Aksoylu, C., Karalar, M., Özdöner, N., Shcherban, E., Stel’makh, S., Beskopylny, A. & Thomas, B. (2024). Influence of ceramic waste powder on shear performance of environmentally friendly reinforced concrete beams. Springer, Scientific Reports, 14 (), 10.1038/s41598-024-59825-7 [Mer information]

• Bansal, M., Bansal, M., Bahrami, A., Krishan, B., Garg, R., Özkılıç, Y. & Althaqafi, E. (2024). Influence of pozzolanic addition on strength and microstructure of metakaolin-based concrete. PLoS, PLOS ONE, 19 (4), 10.1371/journal.pone.0298761 [Mer information]

• Ali, L., Isleem, H., Bahrami, A., Jha, I., Zou, G., Kumar, R., Sadeq, A. & Jahami, A. (2024). Integrated behavioural analysis of FRP-confined circular columns using FEM and machine learning. Elsevier, Composites Part C: Open Access, 13 (), 10.1016/j.jcomc.2024.100444 [Mer information]

• Awoyera, P., Bahrami, A., Oranye, C., Bendezu Romero, L., Mansouri, E., Mortazavi, J. & Hu, J. (2024). Modeling properties of recycled aggregate concrete using gene expression programming and artificial neural network techniques. Frontiers, Frontiers in Built Environment, 10 (), 10.3389/fbuil.2024.1447800 [Mer information]

• Isleem, H., Chukka, N., Bahrami, A., Kumar, R. & Hamah Sor, N. (2024). Nonlinear finite element and machine learning modeling of tubed reinforced concrete columns under eccentric axial compression loading. Elsevier, Alexandria Engineering Journal, 92 (), (380-416). 10.1016/j.aej.2024.02.026 [Mer information]

• Hakeem, I., Madenci, E., Bahrami, A., Özkılıç, Y., Rizal Muhammad Asyraf, M., Tawfik, T. & Fayed, S. (2024). Nonlocal theoretical inquiry into pultruded GFRP plate dynamics: Integrating experimental and numerical analyses. Sage, Journal of Engineered Fibers and Fabrics, 19 (), (1-21). 10.1177/15589250241246072 [Mer information]

• Ghalla, M., Bahrami, A., Badawi, M. & Mlybari, E. (2024). Novel sustainable techniques for enhancing shear strength of RC beams mitigating construction failure risk. Elsevier, Ain Shams Engineering Journal, 15 (11), 10.1016/j.asej.2024.103017 [Mer information]

• Waqas, H., Bahrami, A., Amin, F., Sahil, M. & Saud Khan, M. (2024). Numerical Modeling and Performance Evaluation of Carbon Fiber-Reinforced Polymer-Strengthened Concrete Culverts against Water-Induced Corrosion. MDPI, Infrastructures, 9 (5), 10.3390/infrastructures9050082 [Mer information]

• Alharthai, M., Bahrami, A., Badawi, M., Ghalla, M., Elsamak, G. & Abdelmgeed, F. (2024). Numerical study on enhancing shear performance of RC beams with external aluminum alloy plates bonded using steel anchors. Elsevier, Results in Engineering (RINENG), 22 (), 10.1016/j.rineng.2024.102143 [Mer information]

• Alavi, S., Bahrami, A., Mashayekhi, M. & Zolfaghari, M. (2024). Optimizing Interpolation Methods and Point Distances for Accurate Earthquake Hazard Mapping. MDPI, Buildings, 14 (6), 10.3390/buildings14061823 [Mer information]

• Isleem, H., Zewudie, B., Bahrami, A., Kumar, R., Xingchong, W. & Samui, P. (2024). Parametric investigation of rectangular CFRP-confined concrete columns reinforced by inner elliptical steel tubes using finite element and machine learning models. Elsevier, Heliyon, 10 (2), 10.1016/j.heliyon.2023.e23666 [Mer information]

• Ren, H., Bahrami, A., Cehlin, M. & Wallhagen, M. (2024). Performance of innovative adhesive-free connections for glued-laminated timber under flexural load. Elsevier, Structures, 70 (), 10.1016/j.istruc.2024.107904 [Mer information]

• Garcia, C., Andrade Valle, A., Silva Conde, A., Ulloa, N., Bahrami, A., Onyelowe, K., Ebid, A. & Hanandeh, S. (2024). Predicting the impact of adding metakaolin on the splitting strength of concrete using ensemble ML classification and symbolic regression techniques –a comparative study. Frontiers, Frontiers in Built Environment, 10 (), 10.3389/fbuil.2024.1395448 [Mer information]

• Qiong, T., Jha, I., Bahrami, A., Isleem, H., Kumar, R. & Samui, P. (2024). Proposed numerical and machine learning models for fiber-reinforced polymer concrete-steel hollow and solid elliptical columns. Springer, Frontiers of Structural and Civil Engineering, 18 (), (1169-1194). [Mer information]

• Honghao, R., Bahrami, A., Cehlin, M. & Wallhagen, M. (2024). Proposing new adhesive-free timber edge connections for cross-laminated timber panels: A step toward sustainable construction. Elsevier, Case Studies in Construction Materials, 20 (), 10.1016/j.cscm.2024.e02975 [Mer information]

• Mydin, M., Hamah Sor, N., Bahrami, A., Dulaimi, A., Özkılıç, Y., Althoey, F., Jagadesh, P., Isleem, H. & Tawfik, T. (2024). Residual durability, mechanical, and microstructural properties of foamed concrete subjected to various elevated temperatures. Elsevier, Engineering Science and Technology, an International Journal, 55 (), 10.1016/j.jestch.2024.101725 [Mer information]

• Sahil, M., Bahrami, A., Waqas, H., Amin, F., Mansoor Khan, M., Iqbal, F., Fawad, M. & Najam, F. (2024). Seismic performance evaluation of exterior reinforced concrete beam-column connections retrofitted with economical perforated steel haunches. Elsevier, Results in Engineering (RINENG), 22 (), 10.1016/j.rineng.2024.102179 [Mer information]

• Awoyera, P., Akin-Adeniyi, A., Bahrami, A. & Bendezu Romero, L. (2024). Structural performance of fire-damaged concrete beams retrofitted using bamboo fiber laminates. Elsevier, Results in Engineering (RINENG), 21 (), 10.1016/j.rineng.2024.101821 [Mer information]

• Awoyera, P., Althoey, F., Bahrami, A., Apuye, P., Bendezu R, L., Alotaibi, B., Meza, J. & Abuhussain, M. (2024). Structural retrofitting of RC slabs using bamboo fibre laminate: Flexural performance and crack patterns. Elsevier, Heliyon, 10 (2), 10.1016/j.heliyon.2024.e23999 [Mer information]

• Mydin, M., Jagadesh, P., Bahrami, A., Majeed, S., Dulaimi, A. & Omar, R. (2024). Study on fresh and hardened state properties of eco-friendly foamed concrete incorporating waste soda-lime glass. Springer, Scientific Reports, 14 (1), 10.1038/s41598-024-69572-4 [Mer information]

• Mydin, M., Majeed, S., Bahrami, A., Dulaimi, A., Özkılıç, Y., Omar, R., Abdullah, M., Palanisamy, J. & Awoyera, P. (2024). Study on freshness, morphology, strength, and durability properties of foamed concrete reinforced with agave fiber. Sage, Journal of Engineered Fibers and Fabrics, 19 (), (1-14). 10.1177/15589250241265701 [Mer information]

• Zhou, P., Bahrami, A., Gan, B. & Wang, Z. (2024). Synthesis of Sustainable OPC‐Blended Geopolymer Concrete: Experimental and Modeling Study. Wiley, Advances in Civil Engineering / Hindawi, 2024 (), 10.1155/2024/7854488 [Mer information]

• Janga, S., Raut, A., Bahrami, A., Nagaraju, T. & Bonthu, S. (2024). Temperature-dependent compressive strength modeling of geopolymer blocks utilizing glass powder and steel slag. Elsevier, Results in Materials, 24 (), 10.1016/j.rinma.2024.100636 [Mer information]

• Pandian, A., Arunachalam, K., Bahrami, A., Romero, L., Avudaiappan, S. & Awoyera, P. (2024). Unsymmetricity effects on seismic performance of multi-story buildings. Springer, Discover Applied Sciences, 6 (9), 10.1007/s42452-024-06099-3 [Mer information]

• Yilmaz, A., Yildizel, S., Bahrami, A. & Kaplan, G. (2024). Utilizing genetic programming to evaluate and predict roller-compacted concrete pavements reinforced with coal powder and basalt fiber. Taylor & Francis, The international journal of pavement engineering, 25 (1), 10.1080/10298436.2024.2382328 [Mer information]

• Bahrami, A., Ghalla, M., Elsamak, G., Badawi, M., Mlybari, E. & Abdelmgeed, F. (2024). Various configurations of externally bonded strain-hardening cementitious composite reducing shear failure risk of defected RC beams. Frontiers, Frontiers in Materials, 11 (), 10.3389/fmats.2024.1373292 [Mer information]

• Ganasen, N., Bahrami, A. & Loganathan, K. (2023). A Scientometric Analysis Review on Agricultural Wastes Used as Building Materials. MDPI, Buildings, 13 (2), 10.3390/buildings13020426 [Mer information]

• Bahrami, A. & Rashid, S. (2023). A State-of-the-Art Review on Axial Compressive Behavior of Concrete-Filled Steel Tubes Incorporating Steel Fiber and GFRP Jacketing. MDPI, Buildings, 13 (3), 10.3390/buildings13030729 [Mer information]

• Qayyum, W., Ehtisham, R., Bahrami, A., Camp, C., Mir, J. & Ahmad, A. (2023). Assessment of Convolutional Neural Network Pre-Trained Models for Detection and Orientation of Cracks. MDPI, Materials, 16 (2), 10.3390/ma16020826 [Mer information]

• Ameen, A., Bahrami, A. & Elousa Ansa, I. (2023). Assessment of Thermal Comfort and Indoor Air Quality in Library Group Study Rooms. MDPI, Buildings, 13 (5), 10.3390/buildings13051145 [Mer information]

• Ulla Khan, A., Sateesh Kumar, N., Bahrami, A., Onuralp Özkılıç, Y., Imran, M., Althaqafi, E. & Islam, S. (2023). Behavior of Confined Self-Compacting Concrete under Compression at Elevated Temperatures. MDPI, Buildings, 13 (12), 10.3390/buildings13123115 [Mer information]

• Prashant, K., Arora, H., Bahrami, A., Kumar, A. & Krishna, K. (2023). Development of a Reliable Machine Learning Model to Predict Compressive Strength of FRP-Confined Concrete Cylinders. MDPI, Buildings, 13 (4), 10.3390/buildings13040931 [Mer information]

• Nagaraju, T., Bahrami, A., Azab, M. & Naskar, S. (2023). Development of sustainable high performance geopolymer concrete and mortar using agricultural biomass—A strength performance and sustainability analysis. Frontiers, Frontiers in Materials, 10 (), 10.3389/fmats.2023.1128095 [Mer information]

• Vishali, M., Bahrami, A., Srinivasan Satyanarayanan, K., Thirumurugan, V. & Prakash, M. (2023). Effects of using different materials at interface of trapezoidal reinforced concrete infilled frames–analytical and experimental approaches. Frontiers, Frontiers in Materials, 10 (), 10.3389/fmats.2023.1239312 [Mer information]

• Mohammed Nabi Anwarbasha, G., Chakrabarti, A., Bahrami, A., Venkatesan, V., Vikram, A., Subramanian, J. & Mahesh, V. (2023). Efficient Finite Element Approach to Four-Variable Power-Law Functionally Graded Plates. MDPI, Buildings, 13 (10), 10.3390/buildings13102577 [Mer information]

• Khan, I., Khattak, A., Bahrami, A., Khattak, S. & Ejaz, A. (2023). Engineering Characteristics of SBS/Nano-Silica-Modified Hot Mix Asphalt Mixtures and Modeling Techniques for Rutting. MDPI, Buildings, 13 (9), 10.3390/buildings13092352 [Mer information]

• Nadeem, M., Gul, A., Bahrami, A., Azab, M., Wali Khan, S. & Shahzada, K. (2023). Evaluation of mechanical properties of cored interlocking blocks – A step toward affordable masonry material. Elsevier, Results in Engineering (RINENG), 18 (), 10.1016/j.rineng.2023.101128 [Mer information]

• Bahrami, A., Hornborg, A., Persson, S., Norén, J. & Bengtsson Asplin, B. (2023). Evaluation of Untreated and Surface-Treated Wooden Facades of Buildings in Sweden. MDPI, Coatings, 13 (4), 10.3390/coatings13040746 [Mer information]

• Shabbir, F., Bahrami, A., Ahmad, I., Shakouri Mahmoudabadi, N., Iqbal, M., Ahmad, A. & Özkılıç, Y. (2023). Experimental and Numerical Investigation of Construction Defects in Reinforced Concrete Corbels. MDPI, Buildings, 13 (9), 10.3390/buildings13092247 [Mer information]

• Yıldızel, S., Özkılıç, Y., Bahrami, A., Aksoylu, C., Başaran, B., Hakamy, A. & Arslan, M. (2023). Experimental Investigation and Analytical Prediction of Flexural Behaviour of Reinforced Concrete Beams with Steel Fibres Extracted from Waste Tyres. Elsevier, Case Studies in Construction Materials, 19 (), 10.1016/j.cscm.2023.e02227 [Mer information]

• Ganasen, N., Bahrami, A. & Loganathan, K. (2023). Experimental investigation and optimization of lightweight concrete bricks developed using vermiculite. Frontiers, Frontiers in Materials, 10 (), 10.3389/fmats.2023.1117138 [Mer information]

• Bahrami, A., Blomberg, E., Boqvist, S., Lauridsen, M. & Eriksson, B. (2023). Experimental Investigation of Ultimate Shear Force Capacity of Glulam Reinforced with Glued-in Threaded Rods. Bentham, The Open Construction & Building Technology Journal, 17 (), (1-12). 10.2174/18748368-v17-e230418-2022-20 [Mer information]

• Fayed, S., Madenci, E., Bahrami, A., Özkılıç, Y. & Mansour, W. (2023). Experimental study on using recycled polyethylene terephthalate and steel fibers for improving behavior of RC columns. Elsevier, Case Studies in Construction Materials, 19 (), 10.1016/j.cscm.2023.e02344 [Mer information]

• Bahrami, A., Jakobsson, J. & Söderroos, T. (2023). Factors Influencing Choice of Wooden Frames for Construction of Multi-Story Buildings in Sweden. MDPI, Buildings, 13 (1), 10.3390/buildings13010217 [Mer information]

• Barve, P., Bahrami, A. & Shah, S. (2023). Geopolymer 3D printing: a comprehensive review on rheological and structural performance assessment, printing process parameters, and microstructure. Frontiers, Frontiers in Materials, 10 (), 10.3389/fmats.2023.1241869 [Mer information]

• Ravindran, G., Bahrami, A., Mahesh, V., Katman, H., Srihitha, K., Sushmashree, A. & Nikhil Kumar, A. (2023). Global Research Trends in Engineered Soil Development through Stabilisation: Scientific Production and Thematic Breakthrough Analysis. MDPI, Buildings, 13 (10), 10.3390/buildings13102456 [Mer information]

• Bibi, U., Bahrami, A., Shabbir, F., Imran, M., Nasir, M. & Ahmad, A. (2023). Graphene-Based Strain Sensing of Cementitious Composites with Natural and Recycled Sands. MDPI, Sensors, 23 (16), 10.3390/s23167175 [Mer information]

• Vivek, S., Karthikeyan, B., Bahrami, A., Kumaran Selvaraj, S., Rajasakthive, R. & Azab, M. (2023). Impact and Durability Properties of Alccofine-Based Hybrid Fibre-Reinforced Self-Compacting Concrete. Elsevier, Case Studies in Construction Materials, 19 (), 10.1016/j.cscm.2023.e02275 [Mer information]

• Bahrami, A., Lindqvist, M., Lindqvist Berglund, L. & Eriksson, B. (2023). Important Criteria for Swedish Construction Companies to Choose Environmentally Friendly Concrete. CEJ, Civil Engineering Journal, 9 (1), (197-207). 10.28991/cej-2023-09-01-015 [Mer information]

• Yooprasertchai, E., Bahrami, A., Saingam, P., Hussain, Q., Ejaz, A. & Joyklad, P. (2023). Incorporation of Steel Fibers to Enhance Performance of Sustainable Concrete Made with Waste Brick Aggregates: Experimental and Regression-Based Approaches. MDPI, Buildings, 13 (11), 10.3390/buildings13112820 [Mer information]

• Ahmad, A., Bahrami, A., Alajarmeh, O., Chairman, N. & Yaqub, M. (2023). Investigation of Circular Hollow Concrete Columns Reinforced with GFRP Bars and Spirals. MDPI, Buildings, 13 (4), 10.3390/buildings13041056 [Mer information]

• Nakkeeran, G., Krishnaraj, L., Bahrami, A., Almujibah, H., Panchal, H. & Zahra, M. (2023). Machine learning application to predict the mechanical properties of glass fiber mortar. Elsevier, Advances in Engineering Software, 180 (), [Mer information]

• Chen, G., Suhail, S., Bahrami, A., Sufian, M. & Azab, M. (2023). Machine learning-based evaluation of parameters of high-strength concrete and raw material interaction at elevated temperatures. Frontiers, Frontiers in Materials, 10 (), 10.3389/fmats.2023.1187094 [Mer information]

• Murugan, V., Bahrami, A., Srivastava, R., Satyanarayanan, K., Murugan, P. & Arvind, J. (2023). Mechanical and Postfire Structural Performances of Concrete under Elevated Temperatures. CEJ, Civil Engineering Journal, 9 (8), (1863-1879). 10.28991/CEJ-2023-09-08-04 [Mer information]

• Çelik, A., Özkılıç, Y., Bahrami, A. & Hakeem, I. (2023). Mechanical performance of geopolymer concrete with micro silica fume and waste steel lathe scraps. Elsevier, Case Studies in Construction Materials, 19 (), 10.1016/j.cscm.2023.e02548 [Mer information]

• Isleem, H., Reddy Chukka, N., Bahrami, A., Oyebisi, S., Kumar, R. & Qiong, T. (2023). Nonlinear finite element and analytical modelling of reinforced concrete filled steel tube columns under axial compression loading. Elsevier, Results in Engineering (RINENG), 19 (), 10.1016/j.rineng.2023.101341 [Mer information]

• Alaneme, G., Bahrami, A., Ibe Iro, U., Ganasen, N., Otu, O., Udeala, R., Ifebude, B. & Onwusereaka, E. (2023). Numerical Analysis and Parametric Study on Multiple Degrees-of-Freedom Frames. CEJ, Civil Engineering Journal, 9 (7), (1709-1736). 10.28991/CEJ-2023-09-07-012 [Mer information]

• Özkılıç, Y., Özer, Z., Bahrami, A., Çelik, A., Othuman Mydin, M., Karalar, M., Hakeem, I., Roy, K. & Jagadesh, P. (2023). Optimum usage of waste marble powder to reduce use of cement toward eco-friendly concrete. Elsevier, Journal of Materials Research and Technology, 25 (), (4799-4819). 10.1016/j.jmrt.2023.06.126 [Mer information]

• Murthi, P., Lavanya, V., Bahrami, A. & Poongodi, K. (2023). Performance Evaluation of Polypropylene Fiber-Reinforced Pavement Quality Concrete Made with Waste Granite Powder. MDPI, Buildings, 13 (5), 10.3390/buildings13051294 [Mer information]

• Ahmed Waqas, H., Bahrami, A., Sahil, M., Poshad Khan, A., Ejaz, A., Shafique, T., Tariq, Z., Ahmad, S. & Onuralp Özkılıç, Y. (2023). Performance Prediction of Hybrid Bamboo-Reinforced Concrete Beams Using Gene Expression Programming for Sustainable Construction. MDPI, Materials, 16 (20), 10.3390/ma16206788 [Mer information]

• Nagaraju, T., Bahrami, A., Prasad, C., Mantena, S., Biswal, M. & Islam, M. (2023). Predicting California Bearing Ratio of Lateritic Soils Using Hybrid Machine Learning Technique. MDPI, Buildings, 13 (1), 10.3390/buildings13010255 [Mer information]

• Qayyum, W., Ehtisham, R., Bahrami, A., Mir, J., Khan, Q., Ahmad, A. & Özkılıç, Y. (2023). Predicting characteristics of cracks in concrete structure using convolutional neural network and image processing. Frontiers, Frontiers in Materials, 10 (), 10.3389/fmats.2023.1210543 [Mer information]

• Tu, H., Wei, Z., Bahrami, A., Ben Kahla, N., Ahmad, A. & Özkılıç, Y. (2023). Recent advancements and future trends in 3D concrete printing using waste materials. Elsevier, Developments in the Built Environment, 16 (), 10.1016/j.dibe.2023.100187 [Mer information]

• Panda, G., Bahrami, A., Nagaraju, T. & Isleem, H. (2023). Response of High Swelling Montmorillonite Clays with Aqueous Polymer. MDPI, Minerals, 13 (7), 10.3390/min13070933 [Mer information]

• Kumar, K., Vijay, T., Bahrami, A. & Ravindran, G. (2023). Structural Behavior of Concrete Beams Reinforced with Biaxial Geogrid. MDPI, Buildings, 13 (5), 10.3390/buildings13051124 [Mer information]

• Rashid, S. & Bahrami, A. (2023). Structural Performance of Infilled Steel–Concrete Composite Thin-Walled Columns Combined with FRP and CFRP: A Comprehensive Review. MDPI, Materials, 16 (4), 10.3390/ma16041564 [Mer information]

• Yaseen, N., Sahar, U., Bahrami, A., Saleem, M., Iqbal, M. & Saddique, I. (2023). Synergistic impacts of high-volume fly ash and sugarcane bagasse ash on performance of cementitious composites reinforced with polyvinyl alcohol fibers. Elsevier, Results in Materials, 20 (), 10.1016/j.rinma.2023.100490 [Mer information]

• Othuman Mydin, M., Jagadesh, P., Bahrami, A., Dulaimi, A., Özkılıç, Y., Al Bakri Abdullah, M. & Jaya, R. (2023). Use of calcium carbonate nanoparticles in production of nano-engineered foamed concrete. Elsevier, Journal of Materials Research and Technology, 26 (), (4405-4422). 10.1016/j.jmrt.2023.08.106 [Mer information]

• Çelik, A., TUNÇ, U., Bahrami, A., Karalar, M., Othuman Mydin, M., Alomayri, T. & Özkılıç, Y. (2023). Use of waste glass powder toward more sustainable geopolymer concrete. Elsevier, Journal of Materials Research and Technology, 24 (), (8533-8546). 10.1016/j.jmrt.2023.05.094 [Mer information]

• Bahrami, A. & Azizian, D. (2022). Assessment of glulam and reinforced concrete beams in multi-storey building. Sciendo, Civil and Environmental Engineering, 18 (1), (66-75). 10.2478/cee-2022-0007 [Mer information]

• Bahrami, A., Olsson, M. & Svensson, K. (2022). Carbon Dioxide Emissions from Various Structural Frame Materials of Single-Family Houses in Nordic Countries. Innovative Research Publishing, International Journal of Innovative Research and Scientific Studies, 5 (2), (112-120). 10.53894/ijirss.v5i2.414 [Mer information]

• Bahrami, A. & Mahmoudi Kouhi, A. (2022). Energy absorption capacity of concrete-filled steel tube slender columns with different aspect ratios. King Mongkut's Institute of Technology Ladkrabang, Current Applied Science and Technology, 22 (1), (1-16). 10.55003/cast.2022.01.22.005 [Mer information]

• Ameen, A., Bahrami, A. & El Tayara, K. (2022). Energy Performance Evaluation of Historical Building. MDPI, Buildings, 12 (10), 10.3390/buildings12101667 [Mer information]

• Singh, R., Arora, H., Bahrami, A., Kumar, A., Raj Kapoor, N., Kumar, K. & Singh Rai, H. (2022). Enhancing Sustainability of Corroded RC Structures: Estimating Steel-to-Concrete Bond Strength with ANN and SVM Algorithms. MDPI, Materials, 15 (23), 10.3390/ma15238295 [Mer information]

• Bahrami, A., Awn, R., Corona, J. & Eriksson, B. (2022). How Aware and Active is the Swedish Building and Real Estate Sector in Climate-Smart Concrete?. Seventh Sense Research Group, International Journal of Engineering Trends and Technology, 70 (1), (126-138). 10.14445/22315381/IJETT-V70I1P214 [Mer information]

• Thongchom, C., Bahrami, A., Ghamari, A. & Benjeddou, O. (2022). Performance Improvement of Innovative Shear Damper Using Diagonal Stiffeners for Concentrically Braced Frame Systems. MDPI, Buildings, 12 (), 10.3390/buildings12111794 [Mer information]

• Bahrami, A., Edås, M., Magnenat, K. & Norén, J. (2022). The behavior of cross-laminated timber and reinforced concrete floors in a multi-story building. International Journal of Advanced and Applied Sciences, 9 (6), (43-50). 10.21833/ijaas.2022.06.006 [Mer information]

• Bahrami, A., Deniz, S. & Moalin, H. (2022). Vertical Extension of a Multi-Storey Reinforced Concrete Building. Sciendo, International Journal of Applied Mechanics and Engineering, 27 (1), (1-20). 10.2478/ijame-2022-0001 [Mer information]

• Bahrami, A., Oliver, N. & Jonsson, J. (2021). Comparing performance of cross-laminated timber and reinforced concrete walls. Sciendo, International Journal of Applied Mechanics and Engineering, 26 (3), (28-43). 10.2478/ijame-2021-0033 [Mer information]

• Bahrami, A., Vall, A. & Khalaf, A. (2021). Comparison of cross-laminated timber and reinforced concrete floors with regard to load-bearing properties. Horizon Research, Civil engineering and architecture, 9 (5), (1395-1408). 10.13189/cea.2021.090513 [Mer information]

• Bahrami, A. & Heidari, M. (2021). Effectiveness of composite steel-concrete buckling-restrained braces (BRBs) for steel frames. IAEME Publication, International Journal of Advanced Research in Engineering and Technology, 12 (3), (42-55). [Mer information]

• Bahrami, A. & Heidari, M. (2021). Investigation of steel frames equipped with steel eccentric braces and steel-concrete buckling-restrained braces having moment link. Bentham Science, Open Construction & Building Technology Journal, 15 (), (55-69). 10.2174/1874836802115010055 [Mer information]

• Bahrami, A. & Mahmoudi Kouhi, A. (2021). Stiffness of concrete-filled thin-walled steel tubular slender columns. De Gruyter, Civil and Environmental Engineering, 17 (1), (252-258). [Mer information]

• Bahrami, A., Ågren, F. & Kollberg, K. (2021). Strengthening solutions for deep reinforced concrete beam with cutout opening. MDPI, Buildings, 11 (8), 10.3390/buildings11080370 [Mer information]

• Bahrami, A. & Matinrad, S. (2021). Stress concentration in reinforced concrete connections subjected to blast loads. Asian Research Publishing Network, Journal of Engineering and Applied Sciences, 16 (14), (1434-1440). [Mer information]

• Bahrami, A. (2021). Study of eccentric and buckling-restrained bracing systems used in frames. Science Publishing Group, Journal of Civil, Construction and Environmental Engineering, 6 (4), (120-125). [Mer information]

• Bahrami, A. & Yavari, M. (2020). Analysis of composite shear walls with a gap between reinforced concrete wall and steel frame. Archives of Civil Engineering, 66 (1), (41-53). [Mer information]

• Bahrami, A. & Najarnasab, M. (2020). Analysis of steel plate girders with elliptical web openings. Asian Research Publishing Network, Journal of Engineering and Applied Sciences, 15 (4), (556-563). [Mer information]

• Bahrami, A. & Mahmoudi Kouhi, A. (2020). Compressive behaviour of circular, square, and rectangular concrete-filled steel tube stub columns. Horizon Research, Civil engineering and architecture, 8 (5), (1119-1126). 10.13189/cea.2020.080538 [Mer information]

• Bahrami, A. & Heidari, M. (2020). Dynamic analysis of steel eccentrically braced frames with shear link. International Research Publication House, International Journal of Engineering Research and Technology, 13 (2), (233-239). [Mer information]

• Bahrami, A. & Heidari, M. (2020). Dynamic behaviour of steel eccentrically braced frames having moment-shear link. Asian Research Publishing Network, Journal of Engineering and Applied Sciences, 15 (23), (2793-2799). [Mer information]

• Bahrami, A. & Heidari, M. (2020). Evaluation of structural response of composite steel-concrete eccentrically buckling-restrained braced frames. Centre for Evaluation in Education and Science, Journal of Applied Engineering Science, 18 (4), (591-600). 10.5937/jaes0-25497 [Mer information]

• Bahrami, A. & Mahmoudi Kouhi, A. (2020). Load capacity and failure modes of axially and eccentrically loaded thin-walled steel tubular slender columns filled with concrete. Research Trend, International Journal on Emerging Technologies, 11 (5), (517-524). [Mer information]

• Bahrami, A. & Matinrad, S. (2020). Resistance of blast-loaded steel and reinforced concrete beam-to-column connections. International Research Publication House, International Journal of Engineering Research and Technology, 13 (1), (12-27). [Mer information]

• Bahrami, A. & Najarnasab, M. (2020). Ultimate behaviour of perforated steel plate girders subjected to shear loading. Bentham Open, Open Construction & Building Technology Journal, 14 (), (70-83). 10.2174/1874836802014010070 [Mer information]

• Bahrami, A. & Matinrad, S. (2019). Blast effects on reinforced concrete connections. International Journal of Scientific and Technology Research, 8 (11), (3604-3610). [Mer information]

• Bahrami, A. & Yavari, M. (2019). Hysteretic assessment of steel-concrete composite shear walls. Blue Eyes Intelligence Engineering & Sciences Publication, International Journal of Recent Technology and Engineering, 8 (2), (5640-5645). [Mer information]

• Bahrami, A. & Yavari, M. (2019). Performance of Steel Concrete Shear Walls with Two Sided Reinforced Concrete. International Journal of Engineering and Technology Innovation, 9 (3), (228-239). [Mer information]

• Bahrami, A. & Matinrad, S. (2019). Response of steel beam-to-column bolted connections to blast loading. Blue Eyes Intelligence Engineering and Sciences, International Journal of Recent Technology and Engineering, 8 (3), (3639-3648). 10.35940/ijrte.C5347.098319 [Mer information]

• Bahrami, A., Wan Badaruzzaman, W. & Osman, S. (2014). Numerical study of concrete-filled steel composite (CFSC) stub columns with steel stiffeners. Latin American Journal of Solids and Structures, 11 (4), (683-703). 10.1590/s1679-78252014000400008 [Mer information]

• Bahrami, A., Wan Badaruzzaman, W. & Osman, S. (2013). Behaviour of stiffened concrete-filled steel composite (CFSC) stub columns. Latin American Journal of Solids and Structures, 3 (10), (409-439). [Mer information]

• Bahrami, A., Wan Badaruzzaman, W. & Osman, S. (2013). Investigation of concrete-filled steel composite (CFSC) stub columns with bar stiffeners. Journal of Civil Engineering and Management, 19 (3), (433-446). [Mer information]

• Bahrami, A., Wan Badaruzzaman, W. & Osman, S. (2013). Performance of axially loaded tapered concrete-filled steel composite slender columns. Journal of Civil Engineering and Management, 19 (5), (705-717). [Mer information]

• Bahrami, A., Wan Badaruzzaman, W. & Osman, S. (2012). Structural behaviour of tapered concrete-filled steel composite (TCFSC) columns subjected to eccentric loading. Computers and Concrete, 9 (6), (403-426). [Mer information]

• Bahrami, A. & Shanmugam, N. (2011). Finite element studies on profiled steel composite beams. The IES Journal Part A, 4 (1), (1-7). [Mer information]

• Bahrami, A., Wan Badaruzzaman, W. & Osman, S. (2011). Nonlinear analysis of concrete-filled steel composite columns subjected to axial loading. Structural Engineering and Mechanics, 39 (3), (383-398). [Mer information]